Loading...

Rainwater Tanks

Rainwater Tank

 

The Rainwater Tank node in music allows for the simulation of a range of stormwater harvesting and re-use strategies, which may have benefits both for potable water conservation, and also for restoration of flow regimes towards the pre-development level.
Sort by:  Default

Ecosol Rain Tank
4 / Contact Ecosol representative / 600mm / 1500mm / 3m3 / 25m3 / Peak Flow Bypass / Customised sizing available
The Ecosol Rain Tank systems are designed specifically to filter and store, non-potable rainwater from impervious surfaces in commercial, industrial and... More

StrataCell®
30 standard, unlimited custom / 1000mm / 20000mm / 250mm / 2000mm / 94% void space / Peak Flow Bypass / Customised sizing available
Advanced modular system for support of high pavement loads, while providing 94% void space for storage or infiltration within matrix. Features and... More

Stratavault
unlimited / 600mm / unlimited / 400mm / unlimited / 90% / Peak Flow Bypass / Customised sizing available
Advanced modular system for support of high pavement loads, while providing over 90% void space for storage or infiltration within assembled matrix.... More

Control-Box
The System Control-Box® is a strong structural underground water storage module which provides large capacity water storage without the... More

Treebox
Protection of streets and roots

StormTech
Peak Flow Bypass / Customised sizing available
The StormTech arch system is an underground structural water storage system for rainwater harvesting, stormwater detention and infiltration. StormTech is... More

Variobox
6 / 600mm / 600 / 600mm / 600 / 72m3 / 216L / Customised sizing available
Heavy duty stormwater infiltration system Extreme high-strength and stable structure Flexible in its range of applications High-storage capacity (>... More

Isolator Row
Peak Flow Bypass / Customised sizing available
The Isolator Row™ is a stormwater filtration zone that captures more than 96 per cent of total suspended solids (TSS). It can be designed as a... More

Raingardens
Peak Flow Bypass / Customised sizing available
Raingardens are self-watering, low maintenance gardens. They capture stormwater that runs off hard surfaces after it rains and clean the water before it is... More

RigoFill ST
800mm / Unlimited / 350mm / Unlimited / Unlimited / Peak Flow Bypass
Rigofill ST is an underground Modular Geocellular Stormwater Storage System, (highest void ration 96% on the market) used for Infiltration (soakaways),... More

Rigo Limit V
The RigoLimit V flow control device is the first plastic throttle shaft system which generates the proven vortex flow directly within the shaft base where... More

Horizontal Retention System
Our Retention systems are designed for use in storage, detention and retention at the end of our treatment trains. At the final point of our systems, the... More
ProtecFRP

StormTrap® system
7 / 2350mm / 4000mm or 2000mm / 600mm / 3000mm / 10m3 / 10000+ / Customised sizing available

The StormTrap® system is a modular, below-ground, purpose-designed detention and infiltration system. With flexibility in height and a precast concrete construction. The StormTrap® system allows large pore volumes with small footprint as well as ease of access which enables simple maintenance. Trafficable and low wheel load options are available.


RainVault® system
7 / 1200mm / 3600mm / 1500mm / 4000mm / 5m3 / Multiple Configurations / Customised sizing available
The  RainVault™ system is purpose-designed to capture, treat, store and supply rainwater for non-potable applications. This complete... More

ReserVault® system
7 / 1200mm / 3600mm / 1500mm / 4000mm / 5m3 / Multiple Configurations / Customised sizing available
The ReserVault ® is a modular precast concrete rainwater storage system designed for applications where treatment and pump requirements are already... More